Main features of WNS fuel gas boiler:

1. The overall structure is reasonable, compact, and belongs to the boiler island type, which meets the conditions of quick assembly and delivery. This product is made up of three parts when it leaves the factory; the main boiler, chimney and piping system. The mainframe and chimney have been manufactured in the factory. The pipeline valves and instruments for the mainframe have been randomly installed and shipped to the site for the mainframe. Just assemble it with the chimney. Connect the gas source, power supply, and water pipelines on site to start a test run. The installation cycle is greatly shortened, and the product quality can be guaranteed.

2 Advanced design performance.

The main engine of the WNS fuel gas boiler has an integral structure, the burner is assembled on the front smoke box cover, and the main body is mainly arranged with the heating surface and the combustion chamber. It has a reasonable and compact structure and low steel consumption. The furnace bladder adopts offset wave-shaped furnace bladder. The insulation layer is made of new light-weight thermal insulation materials. The outer packaging is made of colored sheets. The outer packaging is a rectangular parallelepiped, which makes the boiler performance, weight, and structural dimensions. , Compared with domestic products with the same capacity, the appearance model has obvious advancement and aesthetics.

The boiler water supply equipment is configured on the boiler base on the right side of the boiler to integrate it with the main engine, and no additional foundation is required.

3. The water circulation is simple, the structure of the pressurized parts is reasonable, and it can operate safely under the condition of ensuring the water quality.

4. Complete supporting auxiliary machines and advanced comprehensive technical performance.

WNS horizontal oil-fired, gas-fired steam boiler working process: the fuel enters the burner from the external air source, and generates high-temperature flame through automatic adjustment and automatic ignition function. It enters the burnout chamber from the front end of the furnace, and enters the convective heating at the upper side of the burnout chamber. The second convection heating surface enters the second convection heating surface through the upper part of the front smoke box and leaves the boiler from the rear of the rear smoke box to the chimney and is discharged into the atmosphere. If the smoke and dust are generated due to improper air adjustment, they can settle in the front and rear smoke boxes and burnout chambers respectively, and all can be cleaned by opening the inspection door. The working fluid is heated to generate saturated steam and output from the main steam valve to the operating system